Ford 3000 Tractor was a part of Ford’s “Thousand Series” lineup. It was designed to replace “Hundred Series” by the manufacturer. This specific unit model was first manufactured in Highland Park, Michigan, United States, and then followed by the production in Basildon, United Kingdom.
The production years of this agricultural tractor spanned from 1965 to 1975, or for about a decade. In 1975, the model was officially discontinued and then being replaced by the Ford 3600 tractor.
Ford 3000 Tractor weighs at 4,185 pounds. The unit’s dimensions are measured at 64 inches for the width and 127 inches for the length. The height of its top of the steering wheel is 58 inches, while its top of the hood is at 54 inches. Its wheelbase is measured at 75.8 inches.
The Ford 3000 Tractor comes with 3-cylinder engine that can generate 47 hp. You can find two variants of the engine: either the 2.9 L 3-cylinder diesel engine that uses diesel fuel or the 2.6 L 3-cylinder gasoline engine that uses standard gasoline.
The model is equipped with manual transmission. There are three options when it comes to the transmissions: 4, 8, or 10 speeds F and 1 speed R. Before any additional attachments, the 2WD and the 4WD models weigh at approximately 3,700 pounds or 1678 kg.
The size of standard front tires is 5.5×16, and the rear tires come in two alternatives, either the 14.9×24 or 13.6×28. There are several feature options available, such as hydraulic remote valves, power steering, differential lock, or Live PTO.
Ford 3000 Tractor standard equipment on the instrument panel are including the fuel gauge, generator warning light, tachometer-hour meter, oil pressure warning light, and water pressure gauge. The standard model comes with a vertical exhaust, a toolbox, and an ergonomic seat. As an addition, you can also choose from a wide range of accessories options, which include rear wheel weights, front wheel weights, implement work light, grease gun holster, and others.
Now that you have a brief more insight about the Ford 3000 Tractor, you may read more about its specs, features, price, and other helpful information below.
Ford 3000 Tractor Price
- Price: $3,950 USD
Related Post
Ford 3000 Tractor Key Features
| Production | 1965-1975 |
| Horsepower | 47 hp |
| Coolant capacity | 13.1 L |
| Gears | 10 forward and 2 reverse |
| Transmission | Select-O-Speed |
| Hydraulics | open center |
| Chassis | 4×2 2WD |
Ford 3000 Serial Number
| 1965 | C100000 |
| 1966 | C124200 |
| 1967 | C161300 |
| 1968 | C190200 |
| 1969 | C226000 |
| 1970 | C257600 |
| 1971 | C292100 |
| 1972 | C327200 |
| 1973 | C367300 |
| 1974 | C405200 |
| 1975 | C450700 |
Ford 3000 Tractor Specifications
| FORD 3000 TRACTOR ENGINE | |
| Type | Ford gasoline 3-cylinder liquid-cooled 158 ci [2.6 L] |
| Bore/Stroke | 4.20×3.80 inches [107 x 97 mm] |
| Power | 47 hp [35.0 kW] |
| Air cleaner | dry |
| Compression | 8:1 |
| Rated RPM | 2100 |
| Firing order | 1-2-3 |
| Starter volts | 12 |
| Oil capacity | 8 qts [7.6 L] |
| Coolant capacity | 13.8 qts [13.1 L] |
| Sparkplug gap | 0.023-0.027 inches [0.584 mm] |
| Point gap | 0.022-0.028 inches [0.559 mm] |
| FORD 3000 TRANSMISSION | |
| Transmission | Select-O-Speed |
| Type | full power shift |
| Gears | 10 forward and 2 reverse |
| Oil capacity | 11 qts [10.4 L] |
| Oil type | ESN-M2C41-A M2C41 |
| FORD 3000 3 POINT HITCH | |
| Rear Type | I |
| Rear lift (at 24″/610mm) | 1700 lbs [771 kg] |
| FORD 3000 TIRE | |
| Front tire | 5.50-16 |
| Rear tire | 12.4-28 |
| FORD 3000 HYDRAULICS | |
| Type | open center |
| Capacity | 6.3 gal [23.8 L] |
| Pressure | 2500 psi [172.4 bar] |
| Pump flow | 5 gpm [18.9 lpm] |
| Steering flow | 4.25 gpm [16.1 lpm] |
| Steering press | 600 psi [41.4 bar] |
| FORD 3000 DIMENSIONS | |
| Weight (shipping) | 3,700 lbs [1678 kg] |
| Weight (operating) | 4,185 lbs [1898 kg] |
| Weight (ballasted) | 6,940 lbs [3147 kg] |
| Wheelbase | 75.8 inches [192 cm] |
| Length | 127 inches [322 cm] |
| Width | 64 inches [162 cm] |
| Height (steering wheel) | 58 inches [147 cm] |
| Height (hood) | 54 inches [137 cm] |
| Height (exhaust) | 83 inches [210 cm] |
| Ground clearance | 13.4 inches [34 cm] (transmission) |
| Clearance (front axle) | 21.5 inches [54 cm] |
| Front tread | 52 to 80 inches [132 to 203 cm] |
| Rear tread | 52 to 76 inches [132 to 193 cm] |
| FORD 3000 PTO | |
| Rear PTO | Transmission, Live, independent |
| Rear RPM | 540 540/1000 (Select-O-Speed) |
| FORD 3000 MECHANICAL | |
| Chassis | 4×2 2WD |
| Differential lock | mechanical rear |
| Steering | manual, power assist |
| Brakes | mechanical expanding shoe |
| Cab | Open operator station. Canvas cab optional. |
| FORD 3000 ELECTRICAL | |
| Ground | negative |
| Charging system | generator |
| Charging amps | 22 |
| Volts | 12 |
| Gas Amp-hours | 80 |
| Diesel Amp-hours | 128 |
Ford 3000 Tractor Attachments
| LOADER | |
| Loader type | Ford 771 |
| Weight | 815 lbs [369 kg] |
| Height (to pin) | 97 inches [246 cm] |
| Clearance, dumped bucket | 78 inches [198 cm] |
| Dump reach | 33 inches [83 cm] |
| Breakout force (lift) | 2700 lbs [1224 kg] |
| Lift to full height (at pin) | 1800 lbs [816 kg] |
| Bucket width | 60 inches [152 cm] |
| LOADER | |
| Loader type | Ford 772 |
| Weight | 1054 lbs [478 kg] |
| Height (to pin) | 100 inches [254 cm] |
| Clearance, dumped bucket | 80 inches [203 cm] |
| Dump reach | 40 inches [101 cm] |
| Breakout force (lift) | 4000 lbs [1814 kg] |
| Lift to full height (at pin) | 2500 lbs [1134 kg] |
| Bucket width: | 60 inches [152 cm] |
Ford 3000 Tractor Review Video
Related Post
Conclusion
Buying the secondhand Ford 3000 Tractor can be a great alternative for investment, if you are searching for affordable used tractors, a beginner in small scaled farming, or simply need a tractor to do standard jobs. The information above might help you determine whether this model will suit with your needs and requirement or not.